Model Features
CNC-equipped waterjet cutting machines by MAVİJET provide smooth, burr-free cutting without surface deformation.
Advanced waterjet technology can cut and shape virtually any material found in nature.
Capability to cut complex geometric shapes with tight radii and sharp angles.
Ability to initiate cuts at any point on the material.
Maximum cutting capacities include up to 200 mm for aluminum, 150 mm for steel, and 100 mm for stainless steel, alongside precise cutting for thin sheets.
Technical Specifications
| Parameter | Unit | MJT-W3-3020 |
|---|---|---|
| Table size | mm | 3000 × 2000 |
| Head lifting height | mm | 250 |
| CNC system | — | 3-Axis Control Unit (ESA / ITALY); Ethernet; USB port and network interfaces; USB port; manual pulse generator (X, Y, Z) |
| Motor power – X axis | kW | 1.5 kW Servo, 1 pc. |
| Motor power – Y axis | kW | 1.5 kW Servo, 2 pcs. |
| Motor power – Z axis | kW | 0.75 kW Servo, 1 pc. (with brakes) |
| Motion system | — | Hardened screw racks and pinions |
| Guideways | — | Linear guideways and racks (THK-JAPAN) |
| Travel accuracy | mm | 0.01 |
| Positioning accuracy | mm | 0.02 |
| Rapid traverse speed | mm/min | 20,000 |
| High-pressure unit MJT-4000 | — | — |
| Pressure | bar | 4000 |
| Motor | HP | 50 |
| Speed | rpm | 1500 |
| Flow rate at maximum pressure | l/min | 3 |
| Pump displacement | cm³ | 71 (103 l.) |
| Axial piston pump pressure | bar | 200 |
| Optimal inlet water pressure | bar | 4 |
| Water pump pressure | bar | 8–10 |
| Abrasive hopper | — | — |
| Capacity | kg | 350 |
| Required air pressure | bar | 6 |
| Sand dosing system | — | Controlled from the CNC system using a pasometer |
| Sand dosing system – cutting head and mixing chamber | — | — |
| Sand consumption (depending on material type) | g/min | 80–600 |